Tiered Alabaster Wall Sconce
Free USPS Shipping Within the U.S.
30 Days Money-Back Guarantee
Buy 2 = 10% Off | Buy 3 = 20% Off
SPRING BUNDLE DEALS
If you can add it to cart, it's still in stock. Extra savings apply automatically at checkout — stack & save while you can.
- Buy 2 pieces → Extra 10% off
- Buy 3 → Extra 15% off
- Buy 4 → Extra 20% off
- Buy 5+ → Extra 25% off
A sculptural wall sconce — five horizontal alabaster panels, staggered like a slow geometric ladder, lit from within by a warm-white LED bulb. The natural stone glows softly between the stainless-steel supports; the form reads as a quiet wall sculpture, lit or unlit. 10.2″ × 13.8″ × 8.7″ projection (26 × 35 × 22 cm). For foyers, gallery walls, stairwells, and statement bedrooms.
Five tiered panels
Hand-shaped horizontal alabaster panels stagger out from the wall in a quiet geometric rhythm.
Natural stone glow
A warm-white LED bulb behind the panels lights the natural alabaster on both faces.
Stainless-steel support
Slim stainless-steel armature holds the panels in place; the support disappears against the glow.
| Material | Alabaster, Stainless Steel |
| Panels | Five hand-shaped horizontal alabaster panels, staggered |
| Support | Stainless-steel armature |
| Light source | One E27 medium-base bulb · max 40W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Size (W × H × Proj.) | 10.2″ × 13.8″ × 8.7″ (26 × 35 × 22 cm) |
| Power | AC 110–240V; hardwired over a standard junction box |
| Control | Wall switch on/off |
| Use | IP20 indoor and dry locations only |
Click the diagram to enlarge.
W10.2″ × H13.8″ × Proj.8.7″ 26 × 35 × 22 cm
🔍 Click to open full size in a new tab
Natural alabaster — each piece is one of a kind
Each panel is hand-shaped from natural alabaster, with its own veining, color shifts, and small inclusions. No two sconces will look identical — variation from photos is expected, not a defect. Email us for photos of in-stock pieces before ordering.
Deep projection — measure before ordering
This sconce projects 8.7″ (22 cm) from the wall, which is deeper than a typical sconce. Plan for clearance in hallways, beside doorways, and around traffic paths — install where it can sit unobstructed.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended.
- Use one E27 medium-base bulb, max 40W (or LED equivalent). Use LED only — incandescent and halogen bulbs run hot enough to discolor natural alabaster over time. Bulb not included.
- Controlled by a standard wall switch (on/off). Not designed for external dimmer compatibility — pair with a standard switched circuit.
- Indoor and dry locations only (IP20). Safe in damp vanity areas away from shower spray; not rated for wet zones. Confirm your local code before bathroom installation.
- Handle the alabaster panels gently during install — natural stone can chip if knocked. Once mounted, the sconce is stable; the risk is during unpacking and hanging.
- Dust the panels with a soft, dry cloth. No water or solvents on the stone; the stainless-steel armature can be wiped with a barely-damp microfiber.
Is the alabaster real natural stone?
Yes — each panel is hand-shaped from a single piece of natural alabaster. The stone's translucency lets a warm-white LED bulb glow through both faces. Veining, color, and small inclusions are unique to each piece.
Where does it fit best?
Foyers, gallery walls, stairwells, statement bedrooms, dining-room accents. Best on a flat unbroken wall where the staggered panels read against open background. The 8.7″ projection means it isn't a low-profile sconce — give it space.
What bulb does it take, and how bright is it?
One E27 medium-base bulb, max 40W (or LED equivalent), not included. Use a warm-white LED only — incandescent and halogen run hot enough to discolor natural alabaster over time. The light is soft and ambient through the stone — accent and mood light, not whole-room lighting. Pair with ceiling or table lights for general illumination.
Is it dimmable?
The sconce is controlled by a standard wall switch (on/off). It's not designed for external dimmer compatibility — using a dimmer on the wall circuit may cause flicker or shorten the LED life. Use a standard switched circuit.
What's the warranty?
2-year warranty on wiring, socket, and finish. Natural stone veining and inclusions are not defects; chips from drops or knocks during install or use, and alabaster discoloration from using an over-spec or non-LED bulb, are not covered. Email support with photos within 7 days of delivery for any transit damage.
All orders in the U.S. include free shipping with a Track & Trace code, so you can monitor your order every step of the way. You'll receive your tracking code via email within 24-72 hours after placing your order. Yoiu can follwo your order on the TRACKINGPAGE
We want you to be completely satisfied with your purchase. If you are not satisfied, you can return your order within 30 days.
Before returning the goods please contact our customer service at STORENAME and let us know the reason for the return so we can process your request correctly.